Why image first
Every pass over a weak drive is a risk. Data Recovery Pilot's imaging reads healthy areas first and damaged areas last, in several passes, so the drive is read only once. Every later step — scanning, preview, recovery — works on the image instead of the failing disk.
Imaging built for weak drives
- Multi-pass reading: healthy areas first, then retries of weak areas, gently.
- Pause, resume and survive a disconnect.
- Live rescue map: see exactly which parts are copied, pending or unreadable.
- Compressed lossless
.drimgimages: every block checksum-verified. A 3 GB test disk became 0.96 GB and read back byte-identical (same SHA-256). - Standard
.imgexport for use in other programs, plus support for raw.img/.ddand fixed VHD images.
Steps
- Connect the drive and choose Create disk image. Save the image to a different, healthy drive with enough free space.
- Let the passes run — pause any time; the image resumes after a disconnect.
- Open the image in Data Recovery Pilot exactly like a real drive, scan and recover.
Clicking, grinding or a drive that isn't detected usually means mechanical failure. Switch it off and contact a professional recovery lab — software can make physical damage worse.